1/4" - 28 TAPER THREAD GREASE FITTINGS

conform to SAE-J534

Manufactured from mild steel
Uniformly case hardened 0.005" - 0.009"
Yellow zinc plated for maximum resistance to corrosion
SAE-LT taper threads should be assembled onto 1/4"-28 UNF, Class 3B, straight threaded holes with a modified maximum dia of 0.2151" to ensure 75% thread contact


min 83 ROCKWELL 15N	Working pressure 6000 PSI	with BALL CHECK	>75 hrs to RED RUST

Art.Nr	Type	Overall Length	Shank Length	Effective Thread Length (min)	Hex Size (A/F)
Art.Nr	Type	mm	mm	mm	inch
A414T (H)	Straight	13.7	4.6	2.5	5/16
A414TG (H)	Straight with slot	13.7	5.33	2.5	5/16
* WBA414TG (H)	Straight with slot	13.7	5.33	2.5 min.	5/16
A414TL (H)	Straight	17.3	8.6	5.1	5/16
A414TEL(H)	Straight	23.9	15.7	5.1	5/16
A414TEL2(H)	Straight	28.6	19.8	5.2	5/16
1265(H)	Straight	41.3	32.5	5.2min	5/16
A423T(H)	45°	20.8	5.1	2.5	3/18
A423TL(H)	45°	23.9	7.6	5.1	3/8
A421T(H)	65°	18.5	5.1	2.5 min.	3/8
A421TL(H)	65°	19.8	7.5	5.2	3/8
A418T(H)	90°	19.3	5.1	2.5	3/8
A418TL(H)	90°	20.5	7.6	5.1	3/8
AD3014(H)	Stright	41.3		5.2	5/16

* Fitting without Ball Check


1/4"–28 TAPER THD(SAE–LT)	1/4"–28 TAPER THD(SAE–LT)	1/4"–28 TAPER THD(SAE–LT) Without Ball Check	1/4"–28 TAPER THD(SAE–LT)


1/4"–28 TAPER THD(SAE–LT)	1/4"–;28 TAPER THD(SAE LT)	1/4"–28 TAPER THD(SAE LT)	1/4"–28 TAPER THD(SAE–LT)


1/4"–28 TAPER THD(SAE–LT)	1/4"–28 TAPER THD(SAE–LT)	1/4"–28 TAPER THD(SAE–LT)	1/4"–28 TAPER THD(SAE–LT)


1/4"-28 TAPER THD(SAE-LT)

ILLUSTRATIONS-ACTUAL SIZE